Repar2 TR2 Drilling Machine Guarding 2
Repar2 TR2 Drilling Machine Guarding 3
Repar2 TR2 Drilling Machine Guarding 4
Repar2 TR2 Drilling Machine Guarding 5
Repar2 TR2 Drilling Machine Guarding 2
Repar2 TR2 Drilling Machine Guarding 3
Repar2 TR2 Drilling Machine Guarding 4
Repar2 TR2 Drilling Machine Guarding 5

TR2 Interlocked Drill Guard

£258.00£310.00

Repar2 interlocked drill guard. 4mm Polycarbonate screen 200 x 130mm with interlock and optional adjustable brackets.  Left hand fitting as standard.

Clear
Add to Wishlist
Add to Wishlist
i
Product Manual
i
Product Technical Information

Description

 

The popular 3TR2CM drill guard has been designed to fit straight onto the head of the drilling machine without any adaptors. The mounting flange is also reversable which gives additional positioning options. The TR2CM is the same type of guard as the TR7CM, but with a shorter adjustable rod.

This versatile drill guard has a 200mm wide x 130mm high polycarbonate shield which is height adjustable and swings open to the left. The steel mount which contains the anti-tamper interlock attaches to the side of the drilling machine with only two M6 bolts. The IP67 safety interlock switch (Code MIC 001) ensures that the safety screen must be in place before the machine can be operated. DC injection braking is optional, as is our dual-channel safety control panel as well as an additional e-stop or kick-stop. Our ‘safety panels’ contain safety relays and dual-power switching contactors. This system provides redundancy and fault tolerance, and it complies with current Standards regarding safety-related parts of control systems.

Repar2 TR2 Drilling Machine Guarding Drawing2

The TR2KS-CM special version has two additional brackets that allow the shield to be mounted closer and centred to the chuck and drill bit. In the technical illustration they are designated as KSP3 and KSP4.

Repar2 TR2 Drilling Machine Guarding 2