The Protec NOVATEK STRONG perimeter guarding system was created to offer a strong and robust solution at an affordable price that is also aesthetically pleasing and easy to install. It is ideal for those who need to separate exceptionally challenging areas. Strength and stability are the key assets of this product making it particularly suited to industrial robotics and the steel industry. Fully welded 50×50 linear posts are a fundamental element to ensure strength and high impact resistance.
Size & Colours
A large selection of panels sizes the can even be used as doors. Novatek and Ecotek can be combined to form an almost seamless enclosure; in fact, all doors throughout the Protec Techno, Novatek and Ecotek range are identical.
The innovative NOVATEK STRONG 32×67x4mmØ steel wire mesh combined with the black protective coating of the entire panel improves visibility of the machinery within the segregated area compared to some other systems that are available.
The NOVATEK STRONG guarding system has solid framed panels with fully welded 4mmØ steel wire mesh and 50×50 linear posts. The system is for hazardous areas that must ensure a high level of impact resistance or heavier applications subject to force or pressure.
The Quick Novatek Kit is used to optimise assembly time, even enabling installation by a single operator.
The kit contains three brackets specially designed to make sure the product corresponds to the standard norms. When finished the kit must be removed. Fixing hole positions allow the upright post to drilled and bolted to the floor without moving the panel from its desired position.
This post can be adjusted easily in adverse ground conditions and with large inclinations.
This support substitutes the post and it is used specially for long distances. It guarantees good resistance to impact and cost optimization.
Cut Kit for Panels
For uprights 40×40 – 40×80. This kit allows to vertically adjust the posts.
Mesh + PVC
Mesh panel 32×67 with infill front PVC. Novatek perimeter guarding panel frame. Application that allows to protect from the projection of lubricant liquid and shavings, also ideal to reduce the safety distance.
Mesh + Metal Sheet
Upper part of the net 32×67. Solid sheet metal, depth 15/10 for the bottom part. Novatek perimeter guarding panel frame. Application that allows to protect from the projection of shavings.
Polycarbonate + Metal Sheet
The single-hinged door is designed for all day, general use. Simply held closed by magnets it allows access and egress of the segregated area by simply pushing or pulling the door panel.
– Light 735 wheel base 775 (Panel B=700)
– Light 1035 wheel base 1075 (Panel B=1000)
– Light 1235 wheel base 1275 (Panel B=1200)
– Light 1535 wheel base 1575 (Panel B=1500)
The double hinged door uses the same principle as the single-hinged door, but a vertical deadbolt is fitted that anchors one of the two door panels to the ground.
– Light 1450 wheel base 1490 (Panel B=700+700)
– Light 2050 wheel base 2090 (Panel B= 1000+1000)
– Light 2450 wheel base 2490 (Panel B= 1200+1200)
– Light 3050 wheel base 3090 (Panel B= 1500+1500)
SUSPENDED SINGLE SLIDING DOOR
The suspended single sliding door uses an upper monorail carriage, while the lower fixing has an aluminium profile with nylon rollers which reduces oscillation of the panel.
– Light 830 wheel base 870 (Panel B=1000)
– Light 1030 wheel base 1070 (Panel B=1200)
– Light 1330 wheel base 1370 (Panel B=1500)
SUSPENDED DOUBLE SLIDING DOOR
The suspended double sliding doors allows the opening of both doors in opposite directions and uses the same principle as the suspended single sliding door.
– Light 1200 wheel base 1160 (Panel B=700+700)
– Light 1760 wheel base 1800 (Panel B= 1000+1000)
– Light 2160 wheel base 2200 (Panel B= 1200+1200)
– Light 2760 wheel base 2800 (Panel B= 1500+1500)
SINGLE SLIDING DOOR
The single sliding door uses a floor mounted rail (optional fit on smooth, level floors) and the door panel has a wheel at each end allowing smooth, oscillation free operation. The same panel is guided by an upper plate with nylon rollers.
– Light 770 wheel base 860 (panel B=1000)
– Light 970 wheel base 1060 (panel B= 1200)
– Light 1270 wheel base 1360 (panel B= 1500)
DOUBLE SLIDING DOOR
The double sliding doors allows the opening of both doors in opposite directions and uses the same principle as the single sliding door.
– Light 1035 Wheel base 1205 (Panel B=700+700)
– Light 1635 Wheel base 1805 (Panel B=1000+1000)
– Light 2035 Wheel base 2205 (Panel B=1200+1200)
– Light 2635 Wheel base 2805 (Panel B=1500+1500)
SINGLE OR DOUBLE TELESCOPIC DOOR
The telescopic door has the advantage of not having guides at the top or at the bottom and is ideal for forklift truck operation or for those who have space problems. Its operation exploits the efficiency of the telescopic guides or linear movement systems that guarantee optimum efficiency and long service life.
TELESCOPIC DOOR ASSEMBLY
The compact telescopic door assembly is used mainly when there is limited space and a large area to cover. This unique design is ideal for raised loading bays or when a safety barrier is required between two existing fixed points. Its operation exploits the effectiveness of the telescopic rails and floor guides, providing excellent efficiency and a long service life.
VERTICAL SLIDING DOOR – MANUAL
The manually operated vertical sliding door is counterbalanced via a system of pulleys, linear guides and weights that ensure safety, functionality and years of trouble-free operation.
VERTICAL SLIDING DOOR – AUTOMATIC
The vertical sliding door is operated by a pneumatic cylinder. The door panel is guided by a system of pulleys, linear guides, and bearings. An additional safety control panel linked to a laser scanner, safe edge or light curtains is recommended to prevent possible injury to the operator.
HORIZONTAL SLIDING DOOR – AUTOMATIC
ANTI PANIC KEY LOCKS FOR HINGED DOORS
These allow the doors to be locked with a key from outside and ensures safe keyless opening from inside in case of accidental confinement.
KEYED SAFETY LOCKS FOR HINGED OR SLIDING DOORS
The safety lock allows the hinged door or sliding door to be locked with a key and thus prevents access to unauthorised personnel. The device is equipped with an internal anti-imprisonment lever that prevents involuntary closure. Fixings comply with current standards. It is designed for use with one to three padlocks to prevent operators or maintenance personnel becoming accidentally locked within an enclosure or confined space.
TRAPPED KEY LOCK
The trapped key lock allows an increased degree of safety in mechanical operating systems. It prevents the restart of a machine or process against the will of those who are within the segregated area through a coded key that cannot be duplicated. It is easy to instal on both new and existing systems and does not require electrical integration.
The multi-lock lock is applied to the hinged doors and functions as part of an integrated system that controls access to the dangerous area. The device is equipped with an internal anti-imprisonment lever that prevents involuntary closure from inside and allows emergency exit. Fixings comply with current standards. It is designed for use with one to three padlocks to prevent operators or maintenance personnel becoming accidentally locked within an enclosure or confined space.