Repar2 FA Milling Machine Guard 7
Repar2 FA Milling Machine Guard 2
Repar2 FA Milling Machine Guard 3
Repar2 FA Milling Machine Guard 4
Repar2 FA Milling Machine Guard 5
Repar2 FA Milling Machine Guard 15
Repar2 FA Milling Machine Guard 6
Repar2 FA Milling Machine Guard 8
Repar2 FA Milling Machine Guard 9
Repar2 FA Milling Machine Guard 10
Repar2 FA Milling Machine Guard 11
Repar2 FA Milling Machine Guard 12
Repar2 FA Milling Machine Guard 13
Repar2 FA Milling Machine Guard 14
Repar2 FA Milling Machine Guard 16
Repar2 FA Milling Machine Guard 7
Repar2 FA Milling Machine Guard 2
Repar2 FA Milling Machine Guard 3
Repar2 FA Milling Machine Guard 4
Repar2 FA Milling Machine Guard 5
Repar2 FA Milling Machine Guard 15
Repar2 FA Milling Machine Guard 6
Repar2 FA Milling Machine Guard 8
Repar2 FA Milling Machine Guard 9
Repar2 FA Milling Machine Guard 10
Repar2 FA Milling Machine Guard 11
Repar2 FA Milling Machine Guard 12
Repar2 FA Milling Machine Guard 13
Repar2 FA Milling Machine Guard 14
Repar2 FA Milling Machine Guard 16

FA Milling Machine Guard

£818.00£842.00

Repar2 interlocked milling machine guard with polycarbonate screen and LED lighting.

Clear
Add to Wishlist
Add to Wishlist
i
Product Manual
i
Product Installation Guide
i
Product Technical Information

Description

 

A close-fit cutter guard for milling machines, the FA model has two MIC 001 safety micro switches. The guards are available with or without 20W led lighting and right or left fixing. Left-hand fixing is supplied as standard while led lighting is recommended and is referenced as 15LLS20. Designed not to limit the cutting/work area of a milling machine, the guard provides close-fit coverage of the cutting area, leaving the table free and unhindered. FA guards are stocked with diameters from 300mm to 600mm and all are 240mm wide. The easy-to-replace polycarbonate screen is held within a steel frame.

This model is ideal if the head of your milling machine is regularly used for angled work. Due to joint configurations and the available adjustment length of the chrome-plated bars, this model is best suited if jigs and fixtures, indexing and dividing heads or angled vices are regularly bolted to the milling machine table. As with all other F-type, close-fit cutter guards in the range, the arm can be swung right off the table for set-up. The two integral micro switches ensure that the close-fit cutter guard must be in place before machine start-up.

Repar2 FA Milling Machine Guard Drawing