Description

 

The TGS range is available with single or double curved, 500mm-high, steel-framed screens with shockproof poylcarbonate or steel mesh on request. TGS01 is a single screen and TGS02 is the double-screen version. The guards run on hardened linear guide rails with a diameter of 20mm and are fully counterbalanced, thus avoiding any manual handling issues.

The guard is anchored to the ground on a double plate. This system allows for final alignment on an uneven floor. The hinged side screens are manufactured and supplied to suit. Standard interlocking (supplied) is with a 2NC-1NO IP67 tongue switch. Solenoid interlocking is optional.

The standard range TGS01CM (1 screen) – TGS02 (2 screens)

1TGS01CM1500        Sliding guard for vertical lathe (one screen) with micro up to Dia. 1500 h 500

1TGS01CM1700        Sliding guard for vertical lathe (one screen) with micro up to Dia. 1700 h 500

1TGS01CM2000        Sliding guard for vertical lathe (one screen) with micro up to Dia. 2000 h 500

1TGS02CM1500        Sliding guard for vertical lathe (two screens) with micro up to Dia. 1500 h 500 each

1TGS02CM1700        Sliding guard for vertical lathe (two screens) with micro up to Dia. 1700 h 500 each

1TGS02CM2000        Sliding guard for vertical lathe (two screens) with micro up to Dia. 2000 h 500 each

Other sizes are available on request as are polycarbonate or mesh screens. Standard tongue switch is included with optional solenoid locking, speed control and jog control on request.